modern displays are fascinating little things. In particular, the E-Ink displays employed in modern E-books achieve mesmerising paper like contrast with excellent standby power consumption. Many of us at some point have had a go at experimenting with diy displays, but been discouraged by the miniature scales involved. Driving them is hard enough, but building your own?
[MChel] has achieved some exceptional success in building a basic E-Ink display. The account presented on this Russian electronics forum, graciously translated for us by Google Translate, outlines that the greatest barrier to pursing this in your home lab is creating the conductive layer that serve as electrodes for each pixel and depositing the thin layer of electrostatically charged ink pellets onto another transparent yet conductive film. [MChel] option was to extract a small a portion of pre-deposited ink from a smashed and notoriously brittle E-ink display. Next, instead of attempting to build an ambitious and dense grid of electrodes, [MChel] etched a basic battery indicator on a PCB. The ink and the electrodes were then fused with some diy graphite based conductive glue and sealed with some careful yet ingenuitive epoxy laying skills.
The diy electrodes
The result is a working battery indicator that consumes no power, whilst reporting any remaining power.
There is something increasingly defiant and laudable about home-brewing technologies, otherwise thought to be confined to multi-million dollar factories. We have already covered how you must go about making some conductive glass and using it in your homemade LCD.
Leave a Reply